Water Reed Research

“UKRAINIAN ECOLOGICAL GROUP”

Presents Water Reed Research.

We are ready to cooperation with you and ready to meet you in any for you easy time and

support in any questions.

Some information about water reed in Ukraine.

The growing conditions;

Water reed has been used as a thatching material in the Ukraine for centuries.

It is also the primary thatching material in Europe.

This material is therefore the same plant but grown in different places.

Continental Water Reed may come from places such as offer different types the best Ukrainian

reeds South and Central part of Ukraine (Odesky,Poltava,Dnipropetrovsk, Volynsky regions).

All places where there are reed beds around rivers are sources of water reed. Irrelevant of where it

comes from there is always variance in the material from length to diameter and also amount of

tapering. All these factors affect which bundles of material are used on the roof. It will therefore be

down to the skill of the thatcher in using the appropriate material for each individual roof. Lifespan

of the roof also depends on the production of the material and its characteristics e.g. size, hardness

Water Reed Production:

Water Reeds grow on reed beds in river areas Reeds growing in the Danube DeltaIn order to

produce good material for thatching it should be harvested every year. The reason for this is that if

it is left longer the new growth will come up from the bottom among the older reeds and it will not

be straight (dog legged).Straight reeds are required for best thatching practice. To get the best

straight material that is not old and brittle the yearly harvest is done using a variety of methods.

Harvesting of Water Reed is done in the winter time when animals are not nesting and the frost will

have removed a lot of the leaf flag which is not required It has to be cut, bundled and stored so once

dry it is kept dry.

It may be cut by hand. This is a labour intensive environmentally friendly but slow and potentially

expensive method of reed gathering. In the past, gathering local materials for local roofs by hand

was the norm but now it is part of a thriving global thatching business and machinery is used. Most

machines cut and bundle the reeds.

Once the reeds are cut they are bundled and stacked like teepees until they are dry. In Ukraine they

are then cleaned out by hand and bundled ready for thatching use. Some may be tied with raffia, or

string or plastic bands. Usual size of a bundle is 60cm diameter and length ranging from 140 cm to

2,2 m. The reeds can then be sorted by length and fineness. Reeds should be stored in a dry and non

humid atmosphere with minimum handling to prevent damage. Moisture content under 20% is

ecommended. Bundles are often baled in 20s, 50s, 75 s or 100 depending on provenance. Bales are

strapped with plastic or metal bands for ease of storage and moving.

Water reed is transported usually by container or by lorry and trailer. A container can hold up to

2.200 bundles and a lorry and drag up to 3.500. An average roof can use around to 1.500 to 2.000

bundles of Water Reed.

Once on the roof the bundles are positioned and the strings/bindings cut so the material can be fixed

and dressed into place by the craftsman.

Water Reed roofs are generally thought to be the longest lasting of the thatching materials, although

there are always exceptions. Generally these roofs last between 25 – 40+ years.

Used Reed cutting machines:

This are small, walk behind machines which cut the reed.

Tracked machines:

These machines are usually sit on and run on tracks. They are useful in traversing land but are the

most damaging to the reed beds and as such are being phased out due to environmental impact.

Machines on floatation types:

These machines, as their name suggest, run on huge tyres which spread the weight of the machine

and also can float across water logged areas this minimising the damage to the land.

“UKRAINIAN ECOLOGICAL GROUP” offer to you our Ukrainian reed products.

Specification for the reed reaps for the roofs:

1. The reap measures 61-62cm around.

2. The first tying is 10cm from the reap bottom. The high of the reap is from 120 to 190cm with the

inflorescence.

3. The diameter of the stalk is from 3 to 6mm.

4. The stalks should be yellow, straight and annual without leaves.

5. On the high of 160-180cm reaps are cleaned from the inflorescence.

6. Humidity is 14%.

About price for one truck is 3100 bundles , with price about for one bundle is 2.50– 2.80 (euro)

include DDP ( Англія)DDP. Price: 2.50 – 2.80,

Min Order: 3000,

Supplying Ability: 300000 bundles,

Business Type: Manufacturing,

No. of Employees: 26-50.

Specification for the reed reaps for the mats:

1. The reap measures 105cm around.

2. The first tying is 18-20cm from the reap bottom.

3. The reap high is 110cm, 130cm, 150cm, 170cm, 190cm, 210cm to 180cm without the

inflorescence which is cut.

4. The diameter of the stalk can be of any kind.

5. The stalks should be yellow, straight and annual without leaves.

“UKRAINIAN ECOLOGICAL GROUP” also proposes special different types of cooperation for

regular offer and development this kind manufacture.

For more details about the products, please download PRICE LISTS (PDF) here.